Inrush current

Inrush Current
When electrical equipment is first turned on, a large current flows that exceeds the steady-state current value. This current is called an inrush current.

Why does this inrush current occur?
There are many factors that cause it, and the following are some examples:
  • In equipment with large-capacity smooth capacitors or decoupling capacitors, when the power is first turned on, a large current flows through to charge those capacitors - a necessity when first powering up the equipment.
  • Immediately after the power is turned on, the filament and other parts have low resistance, and a large current flows. (As they begin to generate heat and warm up, their resistance increases and the current drops to the steady-state current.)

To provide a more easy-to-understand image of inrush current, Figure 1 shows the current waveform when the power is turned on. When the power is turned on, current begins to flow, and the initial current flow reaches the peak current value that is larger than the steady-state current value. Following this, the current value gradually decreases until it stabilizes at the steady-state current. The part during which a large current flows before reaching the steady-state current is the inrush current. If the size of the inrush current exceeds that allowed by the part in use, depending on the magnitude of the inrush current (difference between the peak current value and the steady-state current value) and length of its duration (the length of time until the peak current value converges with the steady-state current value, hereafter called the pulse width), the part used in the circuit may overheat, potentially causing the electrical device to malfunction or break down.

LED Wiki: Inrush current Figure 1. Current waveform when the device is powered up.

1 Réaction

Johne170 — 3 juin 2014 à 22:08

As a Newbie, I am continuously searching online for articles that can aid me. Thank you bdgekcdbdggg

Donnez votre avis

Me tenir à jour cet LED Wiki article.
Projet: High bay lamp
High bay lamp
LED Wiki: Wi-Fi, Zigbee and Bluetooth compared
Key characteristics of ZigBee, Wi-Fi and Bluetooth
Range10-100 meters50-100 meters10 – 100 meters
Networking TopologyAd-hoc, peer to peer, star, or meshPoint to hubAd-hoc, very small networks
Operating Frequency868 MHz (Europe) 900-928 MHz (NA), 2.4 GHz (worldwide)2.4 and 5 GHz2.4 GHz
Complexity (Device and application impact)LowHighHigh
Power Consumption (Battery option and life)Very low (low power is a design goal)HighMedium
Security128 AES plus application layer security 64 and 128 bit encryption
Typical ApplicationsIndustrial control and monitoring, sensor networks, building automation, home control and automation, toys, gamesWireless LAN connectivity, broadband Internet accessWireless connectivity between devices such as phones, PDA, laptops, headsets